Miniature LED Bulb, 5Watt, Resistor Warning Canceller
(Pack of
2)
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.
LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 19-20
Frequently Bought Together
Miniature Incandescent Bulb 12V 6CP
Couldn't load pickup availability
Headlamp Capsule Halogen Miniature Bulb 50W
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 15CP
Couldn't load pickup availability
ATO/ATC Fuse 20A Yellow
Couldn't load pickup availability
ATO/ATC Fuse 30A Green
Couldn't load pickup availability
Extension Cord Tri-Tap Adapter 15A 125V
Couldn't load pickup availability
LED Flood Light
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 12CP
Couldn't load pickup availability
Miniature Incandescent Bulb 24V 32CP
Couldn't load pickup availability
SAE Interchangeable Nut Driver Set 11Pc
Couldn't load pickup availability
Ratcheting Dual Driver
Couldn't load pickup availability
Hex Cap Screw Property Class 12.9 M6-1 x 35mm
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
Product Description
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Technical Specifications
| Item#: | 1607725 |
|---|---|
| Type | Miniature |
| Light Source | LED |
| Watts | 5 |
| UNSPSC #: | 25172901 |
| TAA Compliant: | Yes |
| Weight: | 0.07 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
