Pneumatic Threshold Sensor Nylon 1/8"
(Pack of
1.0)
The Legris sensor fitting detects the absence of pressure and translates it to a high-pressure pneumatic output. When used to monitor the decaying or exhausting side of a pneumatic cylinder’s piston, it emits a positive output. When the cylinder comes to the end of its stroke, wherever that may be, the signal emitted from the sensor can then be used to pilot the next step.
Legris sensor fittings are very compact and can be mounted on the cylinder, on the control valve or on a terminal block provided it is between the cylinder and the flow control. For accuracy, the flow control regulator should be positioned as close as possible to the cylinder. It can also be fitted to a sensor fitting mounted on the cylinder.
Senses the end of the stroke and reverses the operation of cylinder sensor on each end (blind/red) Variable end of stroke sensing capability not limited to a fixed return position Mounting flow control directly on sensor provides an additional benefit of control without adding additional fittings Pneumatic device does not require adjustment like mechanical devices Pneumatic or electric version use with air piloted valve and solenoid piloted valve No limit switch pneumatic or electrical
Models with pneumatic output sensor: Supplied with permanent pressure. This is suitable for most applications. Supplied by a branch made on the cylinder and control valve line on the opposite side. As the driving pressure supplies the sensor fitting no untimely signal can appear on start up.
Working temperature: 5°F to +140°F Working pressure: 45 to 115 PSI Breaking Pressure: 7 PSI Sutable fluids: compressed air Contact "OC": 2A/0-48V, 2A/250V 50HZ
Sequence valve signal Pilot valve
ConnectionsBasic ConnectionThe threshold sensor is supplied with constant pilot pressure: this type of connection remains simple and is suitable for the majority of applications. It is therefore possible to produce various locking positions by supplying the threshold sensor with a conditional pilot signal. Recommended ConnectionThe sensor fitting is supplied by a branch made on the cylinder and control valve line on the opposite side. As the driving pressure supplies the sensor fitting no untimely signal can appear on start-up.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together

Pipe Nipple Steel Black 1/2-14 x 1/2-14
Couldn't load pickup availability

Pipe Bushing Brass 1/4-18 x 1/8-27
Couldn't load pickup availability

Pipe Nipple Steel Black 3/8-18 x 3/8-18
Couldn't load pickup availability

Pipe Bushing Brass 3/8-18 x 1/4-18
Couldn't load pickup availability

Hex Head Plug Brass 3/8-18 Male NPT
Couldn't load pickup availability

Hex Head Plug Brass 1/4-18 Male NPT
Couldn't load pickup availability

1025P10 01
Couldn't load pickup availability

1094P60 01
Couldn't load pickup availability

1025P04 04 27
Couldn't load pickup availability

High Solids Paints Gloss Black
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

Nylon Cable Tie 4" Black
Couldn't load pickup availability
Product Description
The Legris sensor fitting detects the absence of pressure and translates it to a high-pressure pneumatic output. When used to monitor the decaying or exhausting side of a pneumatic cylinder’s piston, it emits a positive output. When the cylinder comes to the end of its stroke, wherever that may be, the signal emitted from the sensor can then be used to pilot the next step.Legris sensor fittings are very compact and can be mounted on the cylinder, on the control valve or on a terminal block provided it is between the cylinder and the flow control. For accuracy, the flow control regulator should be positioned as close as possible to the cylinder. It can also be fitted to a sensor fitting mounted on the cylinder.
Senses the end of the stroke and reverses the operation of cylinder sensor on each end (blind/red) Variable end of stroke sensing capability not limited to a fixed return position Mounting flow control directly on sensor provides an additional benefit of control without adding additional fittings Pneumatic device does not require adjustment like mechanical devices Pneumatic or electric version use with air piloted valve and solenoid piloted valve No limit switch pneumatic or electrical
Models with pneumatic output sensor: Supplied with permanent pressure. This is suitable for most applications. Supplied by a branch made on the cylinder and control valve line on the opposite side. As the driving pressure supplies the sensor fitting no untimely signal can appear on start up.
Working temperature: 5°F to +140°F Working pressure: 45 to 115 PSI Breaking Pressure: 7 PSI Sutable fluids: compressed air Contact "OC": 2A/0-48V, 2A/250V 50HZ
Sequence valve signal Pilot valve
ConnectionsBasic ConnectionThe threshold sensor is supplied with constant pilot pressure: this type of connection remains simple and is suitable for the majority of applications. It is therefore possible to produce various locking positions by supplying the threshold sensor with a conditional pilot signal. Recommended ConnectionThe sensor fitting is supplied by a branch made on the cylinder and control valve line on the opposite side. As the driving pressure supplies the sensor fitting no untimely signal can appear on start-up.
Technical Specifications
Item#: | 1197133 |
---|---|
Style | Threshold Sensor |
Configuration | Pneumatic Threshold Sensor |
Thread Size | 1/8 " |
Thread Style | NPT |
Material | Nylon Body, Brass Bolt |
Wrench Size | 9/16 " |
Pilot/Signal Size | 5/32 " |
Working Pressure | 45 to 115 PSI |
Temperature Range | 5 to 140 °F |
UNSPSC #: | 40183100 |
TAA Compliant: | No |
Weight: | 0.0 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov