Self-Piercing Rivet, Used on Aluminum Body Panels, Coated Steel, Tin/Zinc Plated, 3.3mm Body Diameter, 4mm Length
(Pack of
25)
Self-piercing rivets are the most common fastening method used by the OEMs. They are specially-coated steel rivets that pierce the outer body panel and mushroom into the inner body panel without piercing it. A special coating, usually tin/zinc, prevents galvanic corrosion. A special tool is used to press the rivet into place and it must have access to both sides of the panel. Self-piercing rivets are used on aluminum body panels because they duplicate the performance of spot welds without heating the aluminum.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 26-317
Frequently Bought Together
Steel Adhesive Wheel Weight 1/2oz
Couldn't load pickup availability
Steel Wiring Harness Clip Small
Couldn't load pickup availability
Exhaust Weathercap 3"
Couldn't load pickup availability
Slotted Hex Washer Head License Plate Screw Steel
Couldn't load pickup availability
Bumper Cover Split Rivet Aluminum 1/4"
Couldn't load pickup availability
Front Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Radiator Side Air Baffle Retainer Nylon 11/16"
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
PZ Series Zinc Clip-On Wheel Weight 1oz
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Lock Washer Alloy Steel 3/8"
Couldn't load pickup availability
Universal Rivet Steel 1/4"
Couldn't load pickup availability
Self-Piercing Rivet 5.3 x 6.5mm
Couldn't load pickup availability
Self-Piercing Rivet 5.3 x 6mm
Couldn't load pickup availability
Product Description
Self-piercing rivets are the most common fastening method used by the OEMs. They are specially-coated steel rivets that pierce the outer body panel and mushroom into the inner body panel without piercing it. A special coating, usually tin/zinc, prevents galvanic corrosion. A special tool is used to press the rivet into place and it must have access to both sides of the panel. Self-piercing rivets are used on aluminum body panels because they duplicate the performance of spot welds without heating the aluminum.Technical Specifications
| Item#: | 1488997 |
|---|---|
| Type | Self-Piercing Rivet |
| Body Diameter | 3.3 mm |
| Rivet Length | 4.0 mm |
| Quantity Per Package | 25.0000 |
| UNSPSC #: | 31162200 |
| TAA Compliant: | No |
| Weight: | 0.01 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
