Home Anchor Tools/Accessories Setting Tool for Drop-In Anchor 3/8"
Anchor Tools/Accessories
DV_ZoomOriginal_P_41497_WB.jpg
DV_ZoomOriginal_P_41497_WB.jpg

Setting Tool for Drop-In Anchor, 3/8"
(Pack of 1)

Item#: 96956

Lawson Products

1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.4. Place fixture in position, insert bolt and tighten.

Read More
Check Availability

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Catalog page#: 6-27, LE-12

Frequently Bought Together

DV_ZoomOriginal_I_96942_WB.jpg

Anchor Drill Bit Adapter for Installation Tool Kit

Item#: 96942
DV_ZoomOriginal_I_53111_WB.jpg

Threaded Rod Anchor Hex Drive Socket 1/2"

Item#: 53111
DV_ZoomOriginal_I_96944.jpg

5/16" Drive Socket for 1/4" UltraCon Anchors

Item#: 96944
DV_ZoomOriginal_P_615_WB.jpg

Wedge Type Stud Bolt Anchor Steel 1/4 x 3-1/4"

Item#: 84027
DV_ZoomOriginal_P_614_WB.jpg

Drop-In Anchor Steel 3/8 x 1-9/16"

Item#: 96953
DV_ZoomOriginal_I_91645.jpg

Wing Type Toggle Bolt Steel 1/4-20 x 4"

Item#: 91651
DV_ZoomOriginal_P_32673.jpg

Hex Nut Grade 5 Steel 5/8-11

Item#: FA95683
DV_ZoomOriginal_P_32671.jpg

Hex Nut Grade 8 Steel 1/4-20

Item#: FA68400
DV_ZoomOriginal_I_FA88439.jpg

SAE Flat Washer Thru-Hardened Steel 1/2"

Item#: FA88439
DV_ZoomOriginal_I_1495189.jpg

Stepdown Butt Connector 16 to 14/12 to 10 AWG

Item#: 1495189
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 5/8-11

Item#: 53985
DV_ZoomOriginal_I_88439.jpg

SAE Flat Washer Thru-Hardened Steel 1/2"

Item#: 88439

Product Description

1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.4. Place fixture in position, insert bolt and tighten.

Technical Specifications

Item#: 96956
Type Drop-In Anchor Setting Tool
Size 3/8 "
Tool Size 3/8 "
UNSPSC #: 31162100
TAA Compliant: No
Weight: 0.3 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_41497_WB.jpg

Setting Tool for Drop-In Anchor 1/4"

Item#: 96955
DV_ZoomOriginal_I_96941.jpg

Multipurpose Installation Tool Kit for Anchors

Item#: 96941
DV_ZoomOriginal_I_96942_WB.jpg

Anchor Drill Bit Adapter for Installation Tool Kit

Item#: 96942
DV_ZoomOriginal_I_53111_WB.jpg

Threaded Rod Anchor Hex Drive Socket 1/2"

Item#: 53111
DV_ZoomOriginal_I_96944.jpg

5/16" Drive Socket for 1/4" UltraCon Anchors

Item#: 96944
DV_ZoomOriginal_P_41497_WB.jpg

5/8 Drop In Anchor Set Tool

Item#: DY09620086
DV_ZoomOriginal_I_96945_WB.jpg

1/4" Drive Socket for 3/16" UltraCon Anchors

Item#: 96945
DV_ZoomOriginal_I_50849_WB.jpg

Blow-Out Pump for Masonry Anchor Installations

Item#: 50849
DV_ZoomOriginal_P_41497_WB.jpg

3/4 Drop In Anchor Set Tool

Item#: DY09620088
DV_ZoomOriginal_P_41497_WB.jpg

Setting Tool for Drop-In Anchor 1/2"

Item#: 96957
DV_ZoomOriginal_I_DY09850000.jpg

Wall Hook

Item#: DY09850000

Your Recently Viewed Items