Silicone Heater and Radiator Hose, Better Quality, 2-Ply, 2-1/2" ID, 2-15/16" OD, 5" Bend Radius, 35PSI
(Pack of
3)
• Use where space requirements dictate sharp bends
• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 22-9
Frequently Bought Together
Coolant Hose 2-5/16" OD x 5'
Couldn't load pickup availability
Silicone Heater and Radiator Hose 3-1/4" OD
Couldn't load pickup availability
Silicone Heater and Radiator Hose 2-1/4" OD
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #6 1/2 to 13/16"
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 1/4 x 1/4-18
Couldn't load pickup availability
Hose Clamp 301 SS 1-9/16 to 2-1/2"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #10 3/4 to 1-1/8"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 13/16 to 1-3/4"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #12 7/8 to 1-1/4"
Couldn't load pickup availability
DOT Connector Male Brass 3/8 x 1/4-18
Couldn't load pickup availability
Super 77 Miniature Hose Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Hose Clamp 301 SS 11/16 to 1-1/2"
Couldn't load pickup availability
Qwik Stik® Electrolyte Powder Mix Grape
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Product Description
• Use where space requirements dictate sharp bends• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Technical Specifications
| Item#: | 88710 |
|---|---|
| Type | Silicone Heater and Radiator Hose |
| I.D. | 2-1/2 " |
| Hose O.D. | 2-15/16 " |
| Bend Radius | 5 " |
| Working Pressure | 35 |
| Burst Pressure | 110 PSI |
| Hose Cover Material | Silicone |
| Hose Reinforcement | Polyester with Steel Helix |
| Temperature | -65 to +350 F |
| Category/Performance | Better Quality - 2 Ply Large Diameter - Steel Reinforced |
| Dash Size | -40 |
| UNSPSC #: | 25170000 |
| TAA Compliant: | Yes |
| Weight: | 2.5 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
