Spot Weld Remover Drill Bit HSS 3" (M10)
(Pack of
1.0)
M100 for average domestic spot welds (10mm).
• Drill point is self-centering, so pre-marking is not required
• Three flats on shank prevent drill from spinning in drill chuck
• Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-21
Frequently Bought Together
Twist-On Surface Conditioning Disc 3" Maroon
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 3" Brown
Couldn't load pickup availability
Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 19/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/64"
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
CryoSpotWeld Ejector Pin
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 9/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
Product Description
M100 for average domestic spot welds (10mm).• Drill point is self-centering, so pre-marking is not required
• Three flats on shank prevent drill from spinning in drill chuck
• Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 54456 |
|---|---|
| Type | Spot Weld Drill Bit |
| Style | Single-Ended |
| Material | HSS |
| Diameter | 3/8 " |
| Decimal Equivalent | 0.3750 " |
| Flute Type | Spiral |
| Overall Length | 3 " |
| Shank | Straight |
| UNSPSC #: | 23241606 |
| TAA Compliant: | Yes |
| Weight: | 0.09 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
