Structural Industrial Strength Adhesive 50ml
(Pack of
1.0)
Forms a high-strength bond on many different materials including wood, steel, stainless steel, aluminum, plastics, fiberglass and ceramics. The Lawson Structural Adhesive dispensing system mixes the two-component adhesive and sets up in as little as 15 minutes.
Each cartridge comes with one mixer tube; a dispenser gun is required to dispense adhesive.
• Resists chemicals, salt and temperatures up to 300°F (149°C)
• Ideal for construction, architecture, structural maintenance, plumbing and furniture
NOTE: Adhesive must be stored below 75°F (24°C)
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog Page#: 24-11
Frequently Bought Together
242â„¢ Removable Threadlocker Blue 0.34fl.oz
Couldn't load pickup availability
Flexseal RTV Silicone Sealant Clear 10.3oz
Couldn't load pickup availability
PTFE Pipe Thread Seal White 3/4 x 520"
Couldn't load pickup availability
PTFE Pipe Thread Seal White 1/2 x 520"
Couldn't load pickup availability
Citrus Pumice Hand Cleaner 1gal
Couldn't load pickup availability
Jackpot Cherry Hand Cleaner with Pumice 1gal
Couldn't load pickup availability
Mega-Shot Clear Adhesive
Couldn't load pickup availability
Fixmaster® Fast Cure Epoxy 1oz
Couldn't load pickup availability
Wear-Flex Quick Mix Non-Sag
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Nylon Cable Tie 11.75" Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Product Description
Forms a high-strength bond on many different materials including wood, steel, stainless steel, aluminum, plastics, fiberglass and ceramics. The Lawson Structural Adhesive dispensing system mixes the two-component adhesive and sets up in as little as 15 minutes.Each cartridge comes with one mixer tube; a dispenser gun is required to dispense adhesive.
• Resists chemicals, salt and temperatures up to 300°F (149°C)
• Ideal for construction, architecture, structural maintenance, plumbing and furniture
NOTE: Adhesive must be stored below 75°F (24°C)
Technical Specifications
| Item#: | 27812 |
|---|---|
| Type | Industrial Strength Structural Adhesive |
| Container Type | Cartridge |
| Size | 50 ml |
| Full Cure Time | 24 h |
| Working Time | 10 min |
| Physical Form | Liquid |
| UNSPSC #: | 31201607 |
| TAA Compliant: | Yes |
| Weight: | 0.5 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
