Terminal Crimping Tool with Die 26-16 AWG
(Pack of
1.0)
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Frequently Bought Together
Terminal Crimp Die 22-18 AWG
Couldn't load pickup availability
Crimping Tool 8 AWG-1/0 AWG 15"
Couldn't load pickup availability
Terminal Crimp Tool Assortment
Couldn't load pickup availability
Super Magna-Crimp Ratcheted Crimping Tool For 26 - 6 Gauge
Couldn't load pickup availability
Heat Shrink Torch with Fuel Cell Refillable
Couldn't load pickup availability
Terminal Crimp Tool with Die RG58/RG62
Couldn't load pickup availability
Cartridge Roll and Spiral Point Mandrel 3/4"
Couldn't load pickup availability
Flap Band Expanding Rubber Drum 1-3/4"
Couldn't load pickup availability
Crimping Tool Forged 22-10 AWG
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
48" Magntic Aluminum Level
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95108 |
|---|---|
| Type | Crimping Tools |
| Style | Term Crimp Terminal and Connector Crimping System |
| Crimp Range | 26-16 |
| Description | Tool with 95104 Die |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.3 lb |
