Thread Rolling Screw Slotted #10-24 x 1/2"
(Pack of
100.0)
Made in USA with quality, dependability and traceability
Heat-treated and case-hardened to exceed SAE Grade 5 strength properties
The exclusive L mark on the head identifies it as a Lawson-engineered fastener
A 3:1 improvement in corrosion resistance as measured by salt-spray testing (ASTM B117)
Three-thread lead chamfer
High head with deep slot
Forms (not cuts) thread
No chips
50% greater thread engagement
Improved breakaway torque
Increased resistance to back-out
Improved vibration resistance
No need for lockwasher
Meets or exceeds ANSI B18.6.3, SAE J478 and SAE J82
Can be used in tapped holes, with nuts or without
Use to repair damaged threads
Frequently Bought Together

SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability

Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability

Self-Drilling Screw Hex Head 1/4-14 x 3/4"
Couldn't load pickup availability

Machine Screw Phillips Pan Head #10-24 x 3/4"
Couldn't load pickup availability

Sheet Metal Screw Phillips Pan Head #12 x 3/4"
Couldn't load pickup availability

Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability

180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability

Nylon Cable Tie 4" Black
Couldn't load pickup availability

Thread Rolling Screw Phillips #10-24 x 1/2"
Couldn't load pickup availability

Thread Rolling Screw Hex Head 1/4-20 x 5/8"
Couldn't load pickup availability

Thread Rolling Screw Hex Head #10-32 x 1/2"
Couldn't load pickup availability
Product Description
Made in USA with quality, dependability and traceability Heat-treated and case-hardened to exceed SAE Grade 5 strength properties
The exclusive L mark on the head identifies it as a Lawson-engineered fastener
A 3:1 improvement in corrosion resistance as measured by salt-spray testing (ASTM B117)
Three-thread lead chamfer
High head with deep slot
Forms (not cuts) thread
No chips
50% greater thread engagement
Improved breakaway torque
Increased resistance to back-out
Improved vibration resistance
No need for lockwasher
Meets or exceeds ANSI B18.6.3, SAE J478 and SAE J82
Can be used in tapped holes, with nuts or without
Use to repair damaged threads
Technical Specifications
Item#: | 93562 |
---|---|
Diameter | #10 |
Thread Pitch | 24 |
Length | 1/2 " |
Head Style | Hex Washer |
Drive | Slotted |
Finish | Bright Zinc |
Material | Carbon Steel |
Thread | Coarse |
Type | Thread Rolling Screw |
Size | 10-24X1/2 " |
UNSPSC #: | 31161512 |
TAA Compliant: | Yes |
Weight: | 0.55 lb |


