Threaded Pressure Regulator, 1/4" Tube, 1/8" NPT
(Pack of
1)
SKU:1198970 Item#: 1198970
Legris pressure regulator fittings are used to stabilize at a given value the pressure applied to pneumatic equipment, whatever the fluctuations of pressure upstream. The pressure outlet is fully controlled by an adjustment screw. To assist pressure selection, the screw is calibrated showing pressure setting levels. Adjusting pressure to a sufficient value provides a saving of compressed air and therefore energy. Consequently, when mounted in series on a manifold, these fittings control the supply required for each piece of equipment, from a single supply source.
• Input Pressure: 15 to 230 PSI • Regulated Pressure: 15 to 115 PSI• Temperature Range: 15°F to 160°F • Sutable fluids: compressed air • Construction: – Body: polymer, nickel-plated brass– Seals: nitrile– Base: nickel-plated brass with thread sealant on tapered components
Compact, flow pressure regulators may be mounted:- On the cylinder, for reduced pressure in one direction- On the control valve, for reduced pressure in both directions
Frequently Bought Together
MityLiteâ„¢ 1910 LED Flashlight 1x AAA 3.6" Black
Couldn't load pickup availability
MityLiteâ„¢ 1910 LED Flashlight 1x AAA 3.6" Black
Couldn't load pickup availability
MityLiteâ„¢ 1910 LED Flashlight 1x AAA 3.6" Black
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
Product Description
Legris pressure regulator fittings are used to stabilize at a given value the pressure applied to pneumatic equipment, whatever the fluctuations of pressure upstream. The pressure outlet is fully controlled by an adjustment screw. To assist pressure selection, the screw is calibrated showing pressure setting levels. Adjusting pressure to a sufficient value provides a saving of compressed air and therefore energy. Consequently, when mounted in series on a manifold, these fittings control the supply required for each piece of equipment, from a single supply source.• Input Pressure: 15 to 230 PSI • Regulated Pressure: 15 to 115 PSI• Temperature Range: 15°F to 160°F • Sutable fluids: compressed air • Construction: – Body: polymer, nickel-plated brass– Seals: nitrile– Base: nickel-plated brass with thread sealant on tapered components
Compact, flow pressure regulators may be mounted:- On the cylinder, for reduced pressure in one direction- On the control valve, for reduced pressure in both directions
Technical Specifications
| Item#: | 1198970 |
|---|---|
| Manufacturer Model #: | 7305 56 11 |
| Style | Pressure Regulator |
| Configuration | Threaded Pressure Regulator |
| Tube Size | 1/4 " |
| Thread Size | 1/8 " |
| Thread Style | NPT |
| Material | Nylon Body, Nickel-Plated Brass Screw |
| Wrench Size | 17 mm |
| Locknut Wrench Size | 13 mm |
| Working Pressure | 15 to 230 PSI |
| Temperature Range | 15 to 160 °F |
| UNSPSC #: | 40183100 |
| TAA Compliant: | No |
