ASTM A-193 Threaded Stud, Grade B7, Alloy Steel, Plain Finish, Coarse Thread, 125000PSI Strength, 3/4-10 x 3-1/2"
(Pack of
5)
• Unplated
• Stamped B7 on one end for material identification purposes
• Fully chamfered ends
• UNC coarse threads
• Conforms to ASTM A193 and ASME SA193 B7 specifications
• 125,000 PSI minimum tensile strength at room temperature. For maximum allowable stress value at specific temperatures, refer to ASME Boiler and Pressure Code Section VIII.
Used in most piping and flange applications requiring a high-strength ferrous steel bolt capable of operating in a temperature range of –20°F to +750°F (–29°C to +399°C) when used with Grade 2H nuts.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 3-70
Frequently Bought Together
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Threaded Rod Steel 1/4-20 x 36"
Couldn't load pickup availability
Threaded Rod Alloy Steel M6-1 x 1m
Couldn't load pickup availability
Threaded Rod Alloy Steel 1/4-20 x 36"
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
B7 Full Thread Stud 5/8-11 Diameter, 6-1/4" Length – Lawson Products
Couldn't load pickup availability
B7 Full Thread Stud 5/8-11 Diameter, 6" Length – Lawson Products
Couldn't load pickup availability
B7 Full Thread Stud 5/8-11 Diameter, 5-1/4" Length
Couldn't load pickup availability
Product Description
• Unplated• Stamped B7 on one end for material identification purposes
• Fully chamfered ends
• UNC coarse threads
• Conforms to ASTM A193 and ASME SA193 B7 specifications
• 125,000 PSI minimum tensile strength at room temperature. For maximum allowable stress value at specific temperatures, refer to ASME Boiler and Pressure Code Section VIII.
Used in most piping and flange applications requiring a high-strength ferrous steel bolt capable of operating in a temperature range of –20°F to +750°F (–29°C to +399°C) when used with Grade 2H nuts.
Technical Specifications
| Item#: | 96419 |
|---|---|
| Diameter | 3/4 " |
| Thread Pitch | 10 |
| Thread | Coarse |
| Length | 3-1/2 " |
| Grade | B7 |
| Material | Alloy Steel |
| Type | B7 Alloy Studs |
| Finish | Plain |
| Strength | 125,000 PSI |
| Specifications | ASTM A 193 B7 |
| Size | 3/4X3-1/2 " |
| UNSPSC #: | 31163300 |
| TAA Compliant: | No |
| Weight: | 1.87 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
