Wire Thread Insert Repair Kit 7/16-20
(Pack of
1.0)
Fix damaged threads the smart way with the Fix-A-Thred® Wire Thread Insert Repair Kit. Featuring helically-wound stainless steel inserts, this kit restores stripped threads stronger than the original. Each kit includes everything you need—tap, inserts, installation tool, and tang removal tool (in select kits)—neatly packaged in a durable case. Precision-engineered for a wide temperature range and high tensile strength, it's the most cost-effective solution for professional-grade thread repair.
• Helically-wound inserts restore thread strength beyond original specs
• Made from 18-8 stainless steel for corrosion resistance and durability
• Tensile strength of at least 200,000 PSI
• Effective from –275°F to +774°F (–170°C to +412°C)
• Kit includes tap, inserts, installation tool, tang removal tool (varies), and storage box
• Inserts correct pitch and angle errors for reliable fastener engagement
Fix-A-Thred® Insert Installation InstructionsDrill to clear out the damaged thread (if necessary).Thread insert tap supplied. Tap thread should match up with bolt.Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 11-64
Frequently Bought Together
Mechanic's Length Drill Bit Set 29Pcs
Couldn't load pickup availability
1/2" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Jobber Length Drill Bit HSS 31/64"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Thin Wall Locking Thread Repair Insert Kit 10-24
Couldn't load pickup availability
HD Locking Thread Insert Kit 5/16-20 to 1/2-20
Couldn't load pickup availability
Damaged Screw Remover Extractor #2
Couldn't load pickup availability
Cut-Off Wheel for Right Angle Grinder 4-1/2"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 3" Maroon
Couldn't load pickup availability
Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability
Wire Thread Insert Repair Kit 5-40
Couldn't load pickup availability
Wire Thread Insert Repair Kit M8-1.25
Couldn't load pickup availability
Wire Thread Insert Repair Kit 7/16-14
Couldn't load pickup availability
Product Description
Fix damaged threads the smart way with the Fix-A-Thred® Wire Thread Insert Repair Kit. Featuring helically-wound stainless steel inserts, this kit restores stripped threads stronger than the original. Each kit includes everything you need—tap, inserts, installation tool, and tang removal tool (in select kits)—neatly packaged in a durable case. Precision-engineered for a wide temperature range and high tensile strength, it's the most cost-effective solution for professional-grade thread repair.• Helically-wound inserts restore thread strength beyond original specs
• Made from 18-8 stainless steel for corrosion resistance and durability
• Tensile strength of at least 200,000 PSI
• Effective from –275°F to +774°F (–170°C to +412°C)
• Kit includes tap, inserts, installation tool, tang removal tool (varies), and storage box
• Inserts correct pitch and angle errors for reliable fastener engagement
Fix-A-Thred® Insert Installation InstructionsDrill to clear out the damaged thread (if necessary).Thread insert tap supplied. Tap thread should match up with bolt.Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 53837 |
|---|---|
| Type | Insert Repair Kit |
| Size | 7/16-20 |
| Recommended Drill Size | 29/64 " |
| Number of Pieces | 12 |
| UNSPSC #: | 27112810 |
| TAA Compliant: | Yes |
| Weight: | 0.66 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
