1/4x2-1/4 Mas-Tap Hd Anchor
(Pack of
10)
One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
Easy to install and can be removed
Serrated teeth under the head grip to installed fixtures
Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
Works with standard properly sized masonry drill bits, no special bit required
Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Frequently Bought Together

Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"
Couldn't load pickup availability

Tamper-Proof Nail Drive Anchor Steel 1/4 x 2"
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability

Flat Washer 316 Stainless Steel 3/8"
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M6
Couldn't load pickup availability

Masonry Anchor Hex Washer Head #14-10 x 2-1/4"
Couldn't load pickup availability

Large Diameter Tapcon® Anchor 1/2 x 5"
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 5/16 x 4"
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability

Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Product Description
One-piece heavy-duty anchor with sharp aggressive concrete cutting threads Easy to install and can be removed
Serrated teeth under the head grip to installed fixtures
Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
Works with standard properly sized masonry drill bits, no special bit required
Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Technical Specifications
Item#: | DY09991346 |
---|---|
Diameter | 1/4 " |
Length | 2-1/4 " |
Type | Screw Anchor |
Material | Carbon Steel |
Minimum Embedment | 1 " |
Finish | Zinc |
Drive | 7/16 " |
Drill Size | 1/4 " |
Head Style | Hex |
Drive Style | 7/16 " |
Minimum Hole Depth | 1-3/8 " |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 0.45 lb |
Product Restrictions
