DOT Compression Elbow Male 90° Brass 1/2 x 3/8"
(Pack of
5.0)
Easily tackle piping challenges with a durable and reliable brass compression elbow. Designed to join pipes at a 90-degree angle, this PTC fitting provides a seamless solution for changing pipe direction, even in areas where soldering is impractical or unsafe. The compression system—using ferrules and nuts—ensures a secure, leak-resistant connection without the need for welding or soldering. Crafted from corrosion-resistant brass, it offers long-lasting strength and cost-effectiveness, making it an ideal choice for plumbers, contractors, and industrial applications involving water or fluid systems.
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Compression Elbow Male 90° Brass 1/2 x 1/2"
Couldn't load pickup availability
DOT Compression Elbow Male 45° Brass 1/2 x 3/8"
Couldn't load pickup availability
DOT Compression Hose Mender Brass 3/8 x 3/8"
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 1/4 x 1/4"
Couldn't load pickup availability
Ball Check Grease Fitting 45°
Couldn't load pickup availability
DOT Compression Union Brass 1/4"
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 1/4 x 1/4-18
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 11/16 to 1-1/4"
Couldn't load pickup availability
Z Series Crimp-On Hose End 1/2 x 3/4-16"
Couldn't load pickup availability
Pipe Coupling Brass 1/2-14 x 1/2-14
Couldn't load pickup availability
Pipe Coupling Brass 1/4-18 x 1/4-18
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
Product Description
Easily tackle piping challenges with a durable and reliable brass compression elbow. Designed to join pipes at a 90-degree angle, this PTC fitting provides a seamless solution for changing pipe direction, even in areas where soldering is impractical or unsafe. The compression system—using ferrules and nuts—ensures a secure, leak-resistant connection without the need for welding or soldering. Crafted from corrosion-resistant brass, it offers long-lasting strength and cost-effectiveness, making it an ideal choice for plumbers, contractors, and industrial applications involving water or fluid systems.• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84287 |
|---|---|
| Class | Air Brake Ftgs/Tubing/Accessories |
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Male Elbow 90 Degrees |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 1/2 " |
| Fitting Dimension B | 3/8-18 |
| Size | 1/2X3/8 |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.9 lb |
Product Restrictions
