Drop-In Anchor, Steel, 3/8 x 1-9/16"
(Pack of
25)
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together
Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 1/4-20
Couldn't load pickup availability
Conical Screw Anchor Plastic #14 to #16 x 1-3/8"
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
Couldn't load pickup availability
Drop-In Anchor High Strength 5/16-18 x 2-7/16"
Couldn't load pickup availability
Drop-In Anchor High Strength 3/4-10 x 6-1/2"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
Nylon Cable Tie 11.75" Black
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | 96953 |
|---|---|
| Diameter | 3/8 " |
| Overall Length | 1-9/16 " |
| Type | Expansion Drop-In Anchor |
| Drill Size | 1/2 " |
| Allowable Tension (4,000 psi Concrete) | 973 lb |
| Allowable Shear (4,000 psi Concrete) | 1,148 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.47 lb |
Product Restrictions
