Fast-Lok® Plate Lfting System
(Pack of
1.0)
The Fast-Lok Pin is designed for use in applications where quick and easy removal is desired. The user is reminded to insure pin is properly installed prior to applying load. NOTE: Minimum ultimate load is 6 times the working load limit. Bolt type anchor shackles supplied with thin head bolt & nut with cotter pin. Meets Federal Specification RR-C 271D, Type IVA, Grade A, Class 3.
• Use electrode AWS class E7018 per MIL-E-22200/1
• For MIG welding use ER70S-2 or ER70S-6 .035 diameter wire
• Center Fast-Lok Plate with 1/16" clearance on each side
• Align with top surface of road plate and tack weld in place to start
• Preheat the Fast-Lok Plate and roadplate in an area approximately 6" radius around the roadplate cutout hole to 200°-300° F
• Preheat temperature must be held during the welding process. A propane torch could be used for this
• Use fresh electrodes because old electrodes may have absorbed humidity into the flux which could cause cracking
• Weld Fast-Lok Plate to road plate from top side
• Cool gradually to prevent cracking
Frequently Bought Together
Screw Pin Anchor Shackle, 5/8", 6,500 lb WLL
Couldn't load pickup availability
Hook Ceiling Trade Size 8
Couldn't load pickup availability
Spring Link, 3/16", 100 lb WLL, Zinc
Couldn't load pickup availability
Hoist Ring, Heavy Duty®, Metric, 1,500 kg Load Limit
Couldn't load pickup availability
Hoist Ring, Heavy Duty®, Metric, 450 kg Load Limit
Couldn't load pickup availability
Hoist Ring, Heavy Duty®, Metric, 400 kg Load Limit
Couldn't load pickup availability
Wire Rope Sleeve, 3/32", Copper, Zinc Plated
Couldn't load pickup availability
1" X 10' Quick Trac Retractable Ratcheting Tie Down Black 400 Lbs
Couldn't load pickup availability
Wire Rope Sleeve, 1/16", Copper, Zinc Plated
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Product Description
The Fast-Lok Pin is designed for use in applications where quick and easy removal is desired. The user is reminded to insure pin is properly installed prior to applying load. NOTE: Minimum ultimate load is 6 times the working load limit. Bolt type anchor shackles supplied with thin head bolt & nut with cotter pin. Meets Federal Specification RR-C 271D, Type IVA, Grade A, Class 3.• Use electrode AWS class E7018 per MIL-E-22200/1
• For MIG welding use ER70S-2 or ER70S-6 .035 diameter wire
• Center Fast-Lok Plate with 1/16" clearance on each side
• Align with top surface of road plate and tack weld in place to start
• Preheat the Fast-Lok Plate and roadplate in an area approximately 6" radius around the roadplate cutout hole to 200°-300° F
• Preheat temperature must be held during the welding process. A propane torch could be used for this
• Use fresh electrodes because old electrodes may have absorbed humidity into the flux which could cause cracking
• Weld Fast-Lok Plate to road plate from top side
• Cool gradually to prevent cracking
Technical Specifications
| Item#: | 1423422 |
|---|---|
| Type | Fast-Lok |
| Working Load Limit | 10,000 lb |
| Swivel | 0 ° |
| Pivot | 180 ° |
| UNSPSC #: | 24101602 |
| TAA Compliant: | Yes |
Product Restrictions
