Nylon Hose Guard 1.06" ID x 25' Length
(Pack of
1.0)
A simple and effective way to reduce hose replacement in high-abrasion areas. Nylon Hose Guards are easy to use and a smart alternative to continuously replacing worn hoses. Woven nylon construction is the perfect barrier to severe abrasion in harsh environments.
• Easy to install• Allows bundling of hose lines
• Meets MSHA 207
1. Cut hose guard to desired length. Sear edges with heat to prevent unraveling.2. Insert hose line(s) into sleeve.3. Clamp with a nylon tie, band clamp or other suitable clamp to hold sleeve in position. Clamping may not be necessary if the sleeve covers the entire hose assembly.
25 ft. per roll
The sizes indicated are related to the hose O.D. and may not fit over fitting. For over-the-fitting applications, a larger size may be needed.
CAUTION: Not recommended for use in applications where surrounding temperatures exceed 250°F (121°C)
Frequently Bought Together
Pipe Street Elbow Brass 90° 1/4-18 x 1/4-18
Couldn't load pickup availability
Hex Bushing Steel 1/2-14 x 3/8-18
Couldn't load pickup availability
Pipe Street Elbow Brass 90° 1/8-27 x 1/8-27
Couldn't load pickup availability
Hose Clamp 301 SS 1-5/16 to 2-1/4"
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
DOT Elbow Male Nylon 1/4 x 1/8-27
Couldn't load pickup availability
Push-to-Connect Tee Nylon 1/4 x 1/4 x 1/4"
Couldn't load pickup availability
Push-to-Connect Union Nylon 1/8 x 1/8"
Couldn't load pickup availability
Push-to-Connect Union Nylon 10 x 10mm
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Product Description
A simple and effective way to reduce hose replacement in high-abrasion areas. Nylon Hose Guards are easy to use and a smart alternative to continuously replacing worn hoses. Woven nylon construction is the perfect barrier to severe abrasion in harsh environments.• Easy to install• Allows bundling of hose lines
• Meets MSHA 207
1. Cut hose guard to desired length. Sear edges with heat to prevent unraveling.2. Insert hose line(s) into sleeve.3. Clamp with a nylon tie, band clamp or other suitable clamp to hold sleeve in position. Clamping may not be necessary if the sleeve covers the entire hose assembly.
25 ft. per roll
The sizes indicated are related to the hose O.D. and may not fit over fitting. For over-the-fitting applications, a larger size may be needed.
CAUTION: Not recommended for use in applications where surrounding temperatures exceed 250°F (121°C)
Technical Specifications
| Item#: | 96562 |
|---|---|
| Material | Nylon |
| I.D. | 1.06 " |
| Description | Hose Guard |
| Length | 25 ft |
| Quantity Per Package | 1.0000 |
| UNSPSC #: | 40183000 |
| TAA Compliant: | No |
| Weight: | 1.06 lb |
Product Restrictions
