Pilotdrive Cryotap 1/2"-13 Starter Hand Tap
(Pack of
1)
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Jobber Length Drill Bit HSS 25/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
KH Series Crimp-On Elbow Flare 90° 1" x 1-5/16-12
Couldn't load pickup availability
Hex Cap Screw Grade 9 Alloy Steel 1/2-13 x 3-3/4"
Couldn't load pickup availability
Hex Cap Screw Grade 9 Alloy Steel 9/16-12 x 2-1/2"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Pilotdrive Cryotap M7 x 1.0 Starter Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap 1/4"-28 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 10-24
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap 1/4-20
Couldn't load pickup availability
T-Handle Hand Tap Wrench 1/4 to 1/2"
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M12 x 1.75
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 3" Brown
Couldn't load pickup availability
Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635017 |
|---|---|
| Type | Fractional |
| Diameter | 1/2 " |
| Pitch | 13 |
| Flutes | 4 |
| Thread Length | 15/16 " |
| H Limits | H3 |
| Overall Length | 3-3/8 " |
| Recommended Drill Size | 27/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.09 lb |
Product Restrictions
