Pilotdrive Cryotap 1/4"-28 Starter Hand Tap
(Pack of
1.0)
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 3" Maroon
Couldn't load pickup availability
Cut-Off Wheel for Right Angle Grinder 4-1/2"
Couldn't load pickup availability
Hex Head Bolt with 7/8" Washer Steel 5/16-18
Couldn't load pickup availability
Hex Flange Bolt Grade 8 1/2-13 x 2-3/4"
Couldn't load pickup availability
KH Series Crimp-On Elbow Flare 90° 1" x 1-5/16-12
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability
Pilotdrive Cryotap M6 x 1.0 Starter Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap #10-24 Starter Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap 1/2"-13 Starter Hand Tap
Couldn't load pickup availability
Cryotap 5/16"-18 Taper Hand Tap
Couldn't load pickup availability
Cryotap 1/4"-20 Taper Hand Tap
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M12 x 1.75
Couldn't load pickup availability
Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/64"
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635010 |
|---|---|
| Type | Fractional |
| Diameter | 1/4 " |
| Pitch | 28 |
| Flutes | 4 |
| Thread Length | 5/8 " |
| H Limits | H3 |
| Overall Length | 2-1/2 " |
| Recommended Drill Size | No. 3 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.03 lb |
Product Restrictions
