Home Tools Cutting Tools Taps Spiral Point Taps Pilotdrive Cryotap M8 x 1.25 Starter Hand Tap
Cutting Tools
Pilotdrive Cryotap M14 x 2.0 Starter Hand Tap
Pilotdrive Cryotap M14 x 2.0 Starter Hand Tap

Pilotdrive Cryotap M8 x 1.25 Starter Hand Tap
(Pack of 1)

Item#: DY80636018

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More
Check Availability

Frequently Bought Together

Abrasive Hand Pad Kit 6 x 9

Abrasive Hand Pad All Purpose 6 x 9"

Item#: 93228
Twist-On Surface Conditioning Disc 3

Twist-On Surface Conditioning Disc 2" Maroon

Item#: 17415
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 11/64"

Item#: 84728
Extendable Handle Ratchet 3/8 Drive, 3/8

Extendable Handle Ratchet 3/8 Drive

Item#: DY89310027
Mini-Hole Saw Kit, 3-Piece Regency Mini-Hole Saw Starter Kit

Mini-Hole Saw Kit

Item#: 1585301
12

10" Dual Jaw Adj and Pipe Wrench

Item#: DY89310225
180-degree Wide Beam Head Light with Side Light

180-degree Wide Beam Head Light with Side Light

Item#: 1639013
Butt Connector 22 to 18 AWG Red, Butt Connector, 2-Piece Heat Seal, Red, 22 to 18 AWG, 1.45

Butt Connector 22 to 18 AWG Red

Item#: 92822
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can

Item#: DA6152
HSS Spiral Point Hand Tap 10-32, Spiral Point Hand Tap, High Speed Steel, 3 Flute, 10-32, 1/2

HSS Spiral Point Hand Tap 10-32

Item#: 61121
HSS Spiral Point Hand Tap 12-24, Spiral Point Hand Tap, High Speed Steel, 3 Flute, 12-24, 1/2

HSS Spiral Point Hand Tap 12-24

Item#: 61123
HSS Spiral Point Hand Tap 7/16-14, Spiral Point Hand Tap, High Speed Steel, 3 Flute, 7/16-14, 7/8

HSS Spiral Point Hand Tap 7/16-14

Item#: 61136
3-Flute HSS Plug Hand Tap M2 x 0.4, Plug Hand Tap, High Speed Steel, Gold Oxide Finish, 3 Flute, M2 x 0.4

4-Flute HSS Bottoming Hand Tap M10 x 1.5

Item#: 63431
4-Flute HSS Taper Hand Tap 1-1/8-12, Taper Hand Tap, High Speed Steel, Gold Oxide Finish, 4 Flute, 1-1/8-12

4-Flute HSS Plug Hand Tap 8-32

Item#: 61015
HSS Spiral Point Hand Tap 3/8-16, Spiral Point Hand Tap, High Speed Steel, 3 Flute, 3/8-16, 3/4

HSS Spiral Point Hand Tap 3/8-16

Item#: 61134
1/4

1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank

Item#: DY80170030
Master Security Bit Set 203Pc, Master Security Bit Driver Set, 1/4

Master Security Bit Set 203Pc

Item#: DY81100900
11Pc Lock and Load Hammer Set, 11Pc Lock and Load Interchangeable Hammer Set with Case

11Pc Lock and Load Hammer Set

Item#: DY81420015

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: DY80636018
Type Metric
Diameter M8
Pitch 1.25 mm
Flutes 4
Overall Length 2-23/32 "
Recommended Drill Size 6.7 mm
UNSPSC #: 23241615
TAA Compliant: No
Weight: 0.05 lb

Product Restrictions

Suggested Products

Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 1/4"

Item#: 84733
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 3/16"

Item#: 84729
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 1/8"

Item#: 84725
1/4

1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank

Item#: DY80170030
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 3/8"

Item#: 84741
Twist-On Surface Conditioning Disc 4

Twist-On Surface Conditioning Disc 2" Brown

Item#: 17416
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 1/2"

Item#: 84749
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 13/64"

Item#: 84730
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 5/32"

Item#: 84727
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 1/4"

Item#: 84733M06
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 5/16"

Item#: 84737
Jobber Length Drill Bit HSS 31/64

Jobber Length Drill Bit HSS 7/32"

Item#: 84731

Your Recently Viewed Items