SnapSkru® Standard Self-Drilling Wall Anchor Nylon
(Pack of
25)
Anchor locks on wall; hear it pop and lock
Shock- and vibration-resistant
Installs with a screwdriver or screw gun; no pre-drilling necessary
Positive stop resists over-turning
Screw and fixture can be removed, leaving anchor in wall for reuse
Remove and reinstall anchor in same hole
For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw pops open anchor, locking anchor to wall.
Frequently Bought Together

Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability

IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability

High Solids Paints Gloss Black
Couldn't load pickup availability

Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Couldn't load pickup availability

ALLIGATOR® Anchor Nylon #6 to #10
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 4"
Couldn't load pickup availability
Product Description
Anchor locks on wall; hear it pop and lock Shock- and vibration-resistant
Installs with a screwdriver or screw gun; no pre-drilling necessary
Positive stop resists over-turning
Screw and fixture can be removed, leaving anchor in wall for reuse
Remove and reinstall anchor in same hole
For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw pops open anchor, locking anchor to wall.
Technical Specifications
Item#: | 50878 |
---|---|
Length | 1 5/8 " |
Type | Wall Anchor |
Body Diameter | 0.6020 " |
Diameter | 31/50 " |
Material | Nylon |
Screw Diameter | No. 6 - No. 10 " |
Recommended Screw Length | Item Thickness + 1-1/4" |
Flange Diameter | 0.6 " |
UNSPSC #: | 31162103 |
TAA Compliant: | Yes |
Weight: | 0.15 lb |
Product Restrictions




