SNAPTOGGLE® Toggle Bolt Anchor 3/8-16
(Pack of
10)
Three times faster than conventional toggle bolts
Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Frequently Bought Together

Conical Screw Anchor Kit Plastic 301Pcs
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 3/16 x 1-3/4"
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability

Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel #6-32 x 2"
Couldn't load pickup availability

Mini Self-Drilling Wall Anchor Steel 1-1/4"
Couldn't load pickup availability

ALLIGATOR® Anchor Nylon #4 to #10
Couldn't load pickup availability
Product Description
Three times faster than conventional toggle bolts Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Technical Specifications
Item#: | 90919 |
---|---|
Type | Toggle Bolt Anchor |
Size | 3/8-16 " |
Diameter | 3/8 " |
Thread | Coarse |
Thread Pitch | 16 tpi |
Drill Size | 3/4 " |
Tensile Proof Test Load In Concrete | 1,167 lb |
Shear Proof Test Load | 2,044 lb |
Tensile Proof Test Load | 1120 lb |
Bolt Size | 3/8-16 " |
UNSPSC #: | 31162103 |
TAA Compliant: | Yes |
Weight: | 0.68 lb |
Product Restrictions
