Solid Die Drill Bit, Carbide, 3/4" Flute Length, 1/4 x 2"
(Pack of
1)
SKU:56264 Item#: 56264
• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryo Armor Cut 15/16" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Cryo Armor Cut 5/8" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Cryo Armor Cut 1" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
3/8" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Mechanic's Length Drill Bit Set 29Pcs
Couldn't load pickup availability
Jobber Length Drill Bit HSS 13/32"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Index-Tend Demo Wrecking Bar
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
Couldn't load pickup availability
Product Description
• Produces chips without generating excessive heat• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 56264 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Bright |
| Diameter | 1/4 " |
| Decimal Equivalent | 0.2500 " |
| Flutes | 2 |
| Flute Length | 3/4 " |
| Material Thickness | 11/16 " |
| Shank | Straight |
| Overall Length | 2 " |
| SAE Code | TD7DSX 0.2500 S1Z33 / 00.75 - 02.00 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.05 lb |
Product Restrictions
