Solid Drill Bit Carbide 1/4"
(Pack of
1.0)
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge
• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• Three flats are ground on the shanks (size 1/4" and greater) to reduce the chances of slippage and breaking
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Solid Drill Bit Carbide 3/16"
Couldn't load pickup availability
Cryo Armor Cut 1/8" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Cryo Armor Cut 3/16" Dia. Drill Bit, Carbide 118o Point
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/8"
Couldn't load pickup availability
Nylon Cable Tie 15.25" Black
Couldn't load pickup availability
Nylon Cable Tie 11.75" Black
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Product Description
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• Three flats are ground on the shanks (size 1/4" and greater) to reduce the chances of slippage and breaking
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P58044 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Titanium CarboNitride |
| Diameter | 1/4 " |
| Decimal Equivalent | 0.2500 " |
| Point | 135 ° |
| Flutes | 3 |
| Flute Length | 1 " |
| Overall Length | 2-1/2 " |
| SAE Code | TD0CSX 0.2500 SB056 / 01.00 - 02.50 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.06 lb |
Product Restrictions
