Turnbuckle, Eye and Eye, Galvanized, 3/4" x 12"
(Pack of
1)
SKU:1442464 Item#: 1442464
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Eye Bolts, Machinery, 3/8 x 1-1/4"
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 1/4" x 1"
Couldn't load pickup availability
Spring Link, Stainless Steel, 1/4", 170 LB WLL
Couldn't load pickup availability
Wire Rope Sleeve, 1/16", Aluminum
Couldn't load pickup availability
Tarp Strap Epdm Rubber with Hooks 14" Long
Couldn't load pickup availability
Screw Pin Anchor Shackle, 5/8", 9,000 lb WLL
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 1/4" x 4.00" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Eye, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 12"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442464 |
|---|---|
| Manufacturer Model #: | 01304 8 |
| Type | Eye and Eye |
| Diameter | 3/4 " |
| Closed Length | 21-3/4 " |
| Working Load Limit | 5,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
