Turnbuckle, Jaw and Eye, Galvanized, 1/4" x 4"
(Pack of
1.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Screw Eye Light-Duty Trade Size 104 1/2" Eye
Couldn't load pickup availability
Quick Link 1/2" Chain Size 3300 Lb Safe Load
Couldn't load pickup availability
Hook Ceiling Trade Size 4
Couldn't load pickup availability
Hook Ceiling Trade Size 6
Couldn't load pickup availability
AkroBin® Divider for 30230,30235, 30255
Couldn't load pickup availability
Clevis Slip Hook, Grade 70, 3/8", 6,600 lb WLL
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability
Turnbuckle, Hook and Eye, Galvanized, 3/8" x 6"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Hook, 1/4" x 3" Take Up
Couldn't load pickup availability
Turnbuckle, Hook and Eye, Galvanized, 1/4" x 4"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442158 |
|---|---|
| Type | Jaw and Eye |
| Diameter | 1/4 " |
| Closed Length | 8-1/4 " |
| Working Load Limit | 500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 0.34 lb |
Product Restrictions
