Turnbuckle, Jaw and Eye, Galvanized, 1" x 6"
(Pack of
1)
SKU:1442097 Item#: 1442097
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Screw Eye Light-Duty Trade Size 104 1/2" Eye
Couldn't load pickup availability
Swivel Eye Bolt Snap, 3/8" Eye Size, 2-15/16" Length, Zinc Finish
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/16", 1,000 lb WLL
Couldn't load pickup availability
Connecting Link, Single Strand, Steel, Industry No. 40
Couldn't load pickup availability
Quick Link 1/8" Chain Size 180 Lb Safe Load
Couldn't load pickup availability
Double Clevis (Mid-Link), 3/8", 6,600 lb WLL
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Cable Tie 13.38" Black
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 12"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 3/8" x 6"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 12"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442097 |
|---|---|
| Manufacturer Model #: | 02673 4 |
| Type | Jaw and Eye |
| Diameter | 1 " |
| Closed Length | 19-1/8 " |
| Working Load Limit | 10,000 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
