Wedge Type Anchor Bolt Steel 3/4 x 5"
(Pack of
2)
Zinc-plated, rust-resistant steel
Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together

Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"
Couldn't load pickup availability

Tamper-Proof Nail Drive Anchor Steel 1/4 x 2"
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability

Flat Washer 316 Stainless Steel 3/8"
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M6
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability

Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor SS 3/8 x 2-3/4"
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor SS 5/8 x 4-1/4"
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor SS 1/4 x 3-1/4"
Couldn't load pickup availability
Product Description
Zinc-plated, rust-resistant steel Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
Item#: | 92865 |
---|---|
Diameter | 3/4 " |
Length | 5 " |
Thread Length | 1-1/2 " |
Drill Size | 3/4 " |
Material | Carbon Steel |
Finish | Bright Zinc |
Type | Wedge Anchor |
Size | 3/4X5 " |
Minimum Embedment | 3 " |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 1.43 lb |
Product Restrictions
