Wedge Type Anchor Bolt, Steel, Zinc Finish, 5/8 x 3-1/2"
(Pack of
10)
SKU:92862 Item#: 92862
• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Couldn't load pickup availability
Catalog page#: 6-31
Frequently Bought Together
Wedge Type Stud Bolt Anchor Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 3/4"
Couldn't load pickup availability
Cable Tie 13.38" Black
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/8 x 3-3/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 3-3/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 5-1/2"
Couldn't load pickup availability
Product Description
• Zinc-plated, rust-resistant steel• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
| Item#: | 92862 |
|---|---|
| Diameter | 5/8 " |
| Length | 3-1/2 " |
| Thread Length | 1-1/4 " |
| Drill Size | 5/8 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Size | 5/8X3-1/2 " |
| Minimum Embedment | 3 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 3.62 lb |
