7-1/4" Circular Saw 3500rpm 13A Motor
(Pack of
1.0)
The S7-XP cuts mild steel to 5/16" thickness and to a depth of 2.25", cleanly cutting channel, angles, pipe and solids. Plastics and metals including mild steel, aluminum and stainless steel are cut as easy as plywood. A laser alignment guide speeds set-up time for straight, accurate and long cuts which are cool-to-the-touch in seconds.
• The 45° beveling capability makes this saw a must-have for welders, mechanical contractors, fabricators, maintenance personnel, farmers, fire and rescue, shipbuilders and roofers
• Built-in chip collector provides ultimate chip and spark control for added safety
• Light weight
• Retracting blade guard
• Cuts clean without burrs
• Spindal lock for fast and easy blade changes
• Laser alignment guide for more accurate cuts
• Cuts cool – the heat is generated through the chips and not through the workpiece
• Easy motor brush replacement
• Supplied with one mild steel blade, edge guide and an operating manual, all stored in a durable carrying/storage case
• Time saver – in less than 6 seconds the 7-1/4" saw will cut 5/16" x 4" mild steel
• UL 745 certified and listed
• CL approved
• Cuts a wide variety of metals including mild steel, aluminum and stainless steel
• Cuts angle iron, steel, black pipe, tubing, rebar, plate steel, metal studs and conduit
When cutting wood, the vented cover must be used. The vented cover IS NOT to be used when cutting steel or aluminum.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Cryoflex High Torque Metal Cutting Saw 14 Inch W/O Blade
Couldn't load pickup availability
14" Chop Saw 1450rpm 15A Motor
Couldn't load pickup availability
Evolution 9" Metal Cutting Circular Saw W/ 3 Stainless Steel Blades
Couldn't load pickup availability
Jobber Length Drill Bit HSS 15/64"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
Evolution 9" Metal Cutting Circular Saw W/ 3 Stainless Steel Blades
Couldn't load pickup availability
Trigger Switch for 9" Circular Saw
Couldn't load pickup availability
Power Cord for 7-1/4" Circular Saw
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 31/64"
Couldn't load pickup availability
Product Description
The S7-XP cuts mild steel to 5/16" thickness and to a depth of 2.25", cleanly cutting channel, angles, pipe and solids. Plastics and metals including mild steel, aluminum and stainless steel are cut as easy as plywood. A laser alignment guide speeds set-up time for straight, accurate and long cuts which are cool-to-the-touch in seconds.• The 45° beveling capability makes this saw a must-have for welders, mechanical contractors, fabricators, maintenance personnel, farmers, fire and rescue, shipbuilders and roofers
• Built-in chip collector provides ultimate chip and spark control for added safety
• Light weight
• Retracting blade guard
• Cuts clean without burrs
• Spindal lock for fast and easy blade changes
• Laser alignment guide for more accurate cuts
• Cuts cool – the heat is generated through the chips and not through the workpiece
• Easy motor brush replacement
• Supplied with one mild steel blade, edge guide and an operating manual, all stored in a durable carrying/storage case
• Time saver – in less than 6 seconds the 7-1/4" saw will cut 5/16" x 4" mild steel
• UL 745 certified and listed
• CL approved
• Cuts a wide variety of metals including mild steel, aluminum and stainless steel
• Cuts angle iron, steel, black pipe, tubing, rebar, plate steel, metal studs and conduit
When cutting wood, the vented cover must be used. The vented cover IS NOT to be used when cutting steel or aluminum.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 64660 |
|---|---|
| Blade Diameter | 7-1/4 " |
| Blade Arbor | 20 mm |
| Depth of Cut | 2-3/8" for Pipe or Angle Iron |
| Maximum RPM | 3,500 |
| Motor | 120V, 1500W, 50-60 Hz 13A |
| Weight | 14.3 lb |
| Dimensions | 12.25" H x 10.5" W x 16.5" L |
| UNSPSC #: | 27112802 |
| TAA Compliant: | No |
| Weight: | 25.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
