Aligning Reamer HSS 1"
(Pack of
1.0)
• Enter holes half their nominal diameter
• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
• 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 11-27
Frequently Bought Together
Cryomagna Cut 1-1/16" Dia Safety Reamer
Couldn't load pickup availability
Aligning Reamer HSS 11/16"
Couldn't load pickup availability
Step Reamer Set
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 13/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Cryo Step Reamer, 13/16", 7/8", 15/16", 1", 1-1/16", 3/8" Shank
Couldn't load pickup availability
Step Reamer
Couldn't load pickup availability
Aligning Reamer HSS 1/4"
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
Product Description
• Enter holes half their nominal diameter• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
• 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97625 |
|---|---|
| Type | Aligning |
| Material | High Speed Steel |
| Diameter | 1 " |
| Decimal Equivalent | 1.0000 " |
| Shank Type | Straight |
| Finish | Gold |
| Shank Size | 1/2 |
| Flats | 3 |
| Flute Type | Right Hand Spiral |
| Flute Length | 5-1/4 " |
| Pilot Drill Diameter | 1/2 |
| Material Thickness | 2-1/4 |
| Overall Length | 6-3/4 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
| Weight: | 0.86 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
