Aligning Reamer, High Speed Steel, Gold Finish, Straight Shank, Right Hand Spiral Flute, 2-7/8" Flute Length, 3/8 x 4"
(Pack of
1)
SKU:86861 Item#: 86861
• Enter holes half their nominal diameter
• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
NOTE: 3/8" dia. does not have 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
Catalog page#: 11-27
Frequently Bought Together
Aligning Reamer HSS 1"
Couldn't load pickup availability
Aligning Reamer HSS 9/16"
Couldn't load pickup availability
Aligning Reamer HSS 3/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Aligning Reamer HSS 1"
Couldn't load pickup availability
Aligning Reamer HSS 9/16"
Couldn't load pickup availability
Aligning Reamer HSS 3/8"
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
2.1 Round Head Ratchet 1/4 Drive 168 Tooth
Couldn't load pickup availability
Product Description
• Enter holes half their nominal diameter• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
NOTE: 3/8" dia. does not have 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 86861 |
|---|---|
| Type | Aligning |
| Material | High Speed Steel |
| Diameter | 3/8 " |
| Decimal Equivalent | 0.3750 " |
| Shank Type | Straight |
| Finish | Gold |
| Shank Size | 1/2 |
| Flats | 3 |
| Flute Type | Right Hand Spiral |
| Flute Length | 2-7/8 " |
| Pilot Drill Diameter | 3/16 |
| Material Thickness | 1 |
| Overall Length | 4 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
