Hard Surface Primer Water Based Epoxy Flat Gray 1 Gallon Kit
(Pack of
1)
SKU:1708782 Item#: 1708782
A two component, water-based epoxy primer designed to improve the adhesion of floor coatings over difficult to coat, or marginally prepared substrates. Substrates include; hard-troweled concrete, aluminum and various types of tiles. Hard Surface Primer can be top coated with most types of floor coating technologies including acrylic, epoxies and polyurethanes.
• Alternative to traditional mechanical and chemical surface preparation
• Excellent primer/basecoat for warehouse line striping, zone marking solid color and decorative floor coatings, including metallic systems
• Can be top coated after 5 hours and before 7 days without sanding
• Compatible with most floor coating technologies including acrylic, epoxies and polyurethanes
• VOC compliant nationwide
• Practical Coverage at Recommended DFT: Approximately 250-350 sq.ft./gal. (6.2-8.6 m2/l)
• Dry Times at 70ºF (21°C) and 50% Relative Humidity - Foot Traffic: 4-6 hours depending on the porosity of the substrate
• Dry Times at 70ºF (21°C) and 50% Relative Humidity - Apply Finish Coat: After 5 Hours and before 7 Days
• Dry Times at 70ºF (21°C) and 50% Relative Humidity - Full Cure: 7 Days
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
High Solids Paints Machinery Dark Gray
Couldn't load pickup availability
Tefseal Pipe Sealant with Teflon White 35ml
Couldn't load pickup availability
Dirt Jet Pro Hand Cleaner Wipes 75Pcs
Couldn't load pickup availability
Fastcoat Floor UV Stable Polyurea Light Gray 1 Gallon
Couldn't load pickup availability
Hydraulic Cement Gray 20 Pound
Couldn't load pickup availability
Fastcoat Floor UV Stable Polyurea Gray 1 Gallon
Couldn't load pickup availability
Anchoring Adhesive 2 Part Epoxy Limestone 8.6 Ounce
Couldn't load pickup availability
Fastcoat Floor UV Stable Polyurea Clear 1 Gallon
Couldn't load pickup availability
Concrete Patch Pourable Compound Gray 10 Pound
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
Couldn't load pickup availability
Product Description
A two component, water-based epoxy primer designed to improve the adhesion of floor coatings over difficult to coat, or marginally prepared substrates. Substrates include; hard-troweled concrete, aluminum and various types of tiles. Hard Surface Primer can be top coated with most types of floor coating technologies including acrylic, epoxies and polyurethanes.• Alternative to traditional mechanical and chemical surface preparation
• Excellent primer/basecoat for warehouse line striping, zone marking solid color and decorative floor coatings, including metallic systems
• Can be top coated after 5 hours and before 7 days without sanding
• Compatible with most floor coating technologies including acrylic, epoxies and polyurethanes
• VOC compliant nationwide
• Practical Coverage at Recommended DFT: Approximately 250-350 sq.ft./gal. (6.2-8.6 m2/l)
• Dry Times at 70ºF (21°C) and 50% Relative Humidity - Foot Traffic: 4-6 hours depending on the porosity of the substrate
• Dry Times at 70ºF (21°C) and 50% Relative Humidity - Apply Finish Coat: After 5 Hours and before 7 Days
• Dry Times at 70ºF (21°C) and 50% Relative Humidity - Full Cure: 7 Days
Technical Specifications
| Item#: | 1708782 |
|---|---|
| Manufacturer Model #: | 313973 |
| Type | Hard Surface Primer |
| Suitable Substrates | Hard-troweled concrete, aluminum and various types of tiles |
| Color | Gray |
| Container Type | Can |
| Size | 1 gal |
| Cure Time (Foot Traffic) | 4-6 h |
| Maximum Temperature | 85 °F |
| Coverage | 250-350 ft² |
| Pot Life | 45 min |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
