High Solids Paints, Gloss Black, 16oz Aerosol
(Pack of 1)

SKU:1509224 Item#: 1509224

Lawson

Provides the best coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.

Read More

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.

Frequently Bought Together

High Solids Paints Semi-Gloss Black, High Solids Paints, Semi-Gloss Black, 16oz Aerosol

High Solids Paints Semi-Gloss Black

Item#: 1509162
High Solids Paints Light Gray, High Solids Paints, Light Gray, 16oz Aerosol

High Solids Paints Light Gray

Item#: 1509227
High Solids Paints OSHA Yellow, High Solids Paints, OSHA Yellow, 16oz Aerosol

High Solids Paints OSHA Yellow

Item#: 1509217
High Solids Paints Flat Black, High Solids Paints, Flat Black, 16oz Aerosol

High Solids Paints Flat Black

Item#: 1509163
Prizm PTFE Penetrating Gel Lubricant 13oz, Prizm PTFE Penetrating Gel Lubricant, Clear, 13oz Aerosol

Prizm PTFE Penetrating Gel Lubricant 13oz

Item#: DA6881
Persist High Temperature Bentonite Grease 14oz, Persist High Temperature Bentonite Grease, Red, 14oz Cartridge

Persist High Temperature Bentonite Grease 14oz

Item#: DN4380D
High Solids Paints Semi-Gloss Black, High Solids Paints, Semi-Gloss Black, 16oz Aerosol

High Solids Paints Semi-Gloss Black

Item#: 1509162
High Solids Paints Light Gray, High Solids Paints, Light Gray, 16oz Aerosol

High Solids Paints Light Gray

Item#: 1509227
High Solids Paints OSHA Yellow, High Solids Paints, OSHA Yellow, 16oz Aerosol

High Solids Paints OSHA Yellow

Item#: 1509217
Butt Connector 16 to 14 AWG Clear, Butt Connector, Crystal Clear Insulation with Blue Stripe, 16 to 14 AWG

Butt Connector 16 to 14 AWG Clear

Item#: 1368141
Butt Connector 22 to 18 AWG Clear, Butt Connector, Crystal Clear Insulation with Red Stripe, 22 to 18 AWG

Butt Connector 22 to 18 AWG Clear

Item#: 1368140
Butt Connector 16 to 14 AWG Blue, Butt Connector, 2-Piece Heat Seal, Polyolefin Insulated, 16 to 14 AWG, 1.45

Butt Connector 16 to 14 AWG Blue

Item#: 92823
Weatherhead H280 Hydraulic Hose Rubber 0.53

Weatherhead H280 Hydraulic Hose Rubber 0.81" x 50'

Item#: 50799 08
Weatherhead H280 Hydraulic Hose Rubber 0.53

Weatherhead H280 Hydraulic Hose Rubber 1.09" x 50'

Item#: 50799 12
Z Series Crimp-On Hose End 1/2

Z Series Crimp-On Hose End 1/2" x 7/8-14

Item#: 16616
Weatherhead H280 Hydraulic Hose Rubber 0.53

Weatherhead H280 Hydraulic Hose Rubber 0.94" x 50'

Item#: 50799 10
Weatherhead H280 Hydraulic Hose Rubber 0.53

Weatherhead H280 Hydraulic Hose Rubber 0.81" x 50'

Item#: 50799 08
Weatherhead H280 Hydraulic Hose Rubber 0.53

Weatherhead H280 Hydraulic Hose Rubber 1.09" x 50'

Item#: 50799 12
Butt Connector 16 to 14 AWG Clear, Butt Connector, Crystal Clear Insulation with Blue Stripe, 16 to 14 AWG

Butt Connector 16 to 14 AWG Clear

Item#: 1368141
Butt Connector 22 to 18 AWG Clear, Butt Connector, Crystal Clear Insulation with Red Stripe, 22 to 18 AWG

Butt Connector 22 to 18 AWG Clear

Item#: 1368140
USS Flat Washer Thru-Hardened Steel 7/8

USS Flat Washer Thru-Hardened Steel 1/4"

Item#: 88445

Product Description

Provides the best coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.

Technical Specifications

Item#: 1509224
Type High Solids Paint
Container Type Aerosol
Size 16 Oz.
Basic Color Black
Color Gloss Black
Application Temperature 50 to 90 °F
Dry Time (To Touch) 10 min
Dry Time (Tack Free) 30 min
Base Type Oil
Physical Form Aerosol
Cure / Recoat Time For best results recoat within 1 hour or after 48 hours.
UNSPSC #: 31211500
TAA Compliant: Yes
Weight: 1.38 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.

Your Recently Viewed Items