High Solids Paints, New Equipment Yellow, 16oz Aerosol
(Pack of
1)
SKU:1509178 Item#: 1509178
Provides the bet coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.Best PerformanceIn a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry! Fewer Cans Needed to Do a Job!Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Construction Equipment – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
Used primarily on earth-moving equipment.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 24-56
Frequently Bought Together
High Solids Paints Fleet White
Couldn't load pickup availability
Industrial Gray Primer
Couldn't load pickup availability
High Solids Paints Harvester Red
Couldn't load pickup availability
Core Penetrating Chain and Cable Lubricant 16oz
Couldn't load pickup availability
High Solids Paints Light Gray
Couldn't load pickup availability
Lubri-Temp Multipurpose Anti-Seize 1lb
Couldn't load pickup availability
Industrial Paint Gloss Black
Couldn't load pickup availability
High Temperature High Solids Paints Black
Couldn't load pickup availability
High Solids Paints Fleet White
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Cable Tie 14.19" Black
Couldn't load pickup availability
DOT Union Nylon 1/4 x 1/4"
Couldn't load pickup availability
Prizm PTFE Penetrating Gel Lubricant 13oz
Couldn't load pickup availability
Product Description
Provides the bet coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.Best PerformanceIn a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry! Fewer Cans Needed to Do a Job!Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Construction Equipment – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
Used primarily on earth-moving equipment.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509178 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | Yellow |
| Color | New Equipment Yellow |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Physical Form | Aerosol |
| Cure / Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| Matches | Caterpillar Yellow |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.5 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
