HSS Combination Drill-Tap M6
(Pack of
1.0)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 11-40
Frequently Bought Together
HSS Combination Drill-Tap M6 x 1
Couldn't load pickup availability
Cryo-Drap 7PC Machine Screw Set, 135o Split Point, W/ Flats
Couldn't load pickup availability
Combination Drill-Tap Set 1/4 to 1/2"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Phenolic Backing Plate Flap Disc 4-1/2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/8"
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
Hex Nut Grade 5 Steel 1/4-20
Couldn't load pickup availability
Cryo-Drap 7/16"-14 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M16 x 1.5
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M14 x 2
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Mechanic's Length Drill Bit HSS 3/16"
Couldn't load pickup availability
48" Magntic Aluminum Level
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27381 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M6 |
| Pitch | 1.0 mm |
| Tap Length | 0.6300 " |
| Material Thickness | 1/2 " |
| Material | HSS |
| Overall Length | 3.24 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
