HSS Spiral Point Hand Tap M3 x 0.5
(Pack of
1)
Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
Shorter overall thread length minimizes drag after the first full thread
Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
Three flutes stabilize starting direction to facilitate tapping straight holes
Manufactured from high-speed steel
Recommended for through holes in most materials
Designed for tapping on machining centers
NOTE: Item No. 63495 does not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-43
Frequently Bought Together

Twist-On Surface Conditioning Disc 3" Brown
Couldn't load pickup availability

Stemmed Crimped Wire Wheel 2"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 19/64"
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability

Qwik Stik® Electrolyte Powder Mix Grape
Couldn't load pickup availability

Utility Knife, Folding , 4" Closed
Couldn't load pickup availability

Pilotdrive Cryotap #10-24 Starter Hand Tap
Couldn't load pickup availability

Pilotdrive Cryotap 1/2"-13 Starter Hand Tap
Couldn't load pickup availability

Pilotdrive Cryotap 7/8"-14 Starter Hand Tap
Couldn't load pickup availability

HSS Spiral Point Hand Tap 1/4-20
Couldn't load pickup availability

4-Flute HSS Plug Hand Tap 1/4-20
Couldn't load pickup availability

Carbon Steel Replacement Hand Tap M12 x 1.75
Couldn't load pickup availability

Jobber Length Drill Bit HSS 15/64"
Couldn't load pickup availability

7" Straight Jaw Locking Pliers
Couldn't load pickup availability

Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability
Product Description
Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap Shorter overall thread length minimizes drag after the first full thread
Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
Three flutes stabilize starting direction to facilitate tapping straight holes
Manufactured from high-speed steel
Recommended for through holes in most materials
Designed for tapping on machining centers
NOTE: Item No. 63495 does not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
Item#: | 63495 |
---|---|
Type | Metric |
Diameter | M3 |
Pitch | 0.5 mm |
Flutes | 2 |
Material | HSS |
Overall Length | 1-15/16 " |
Recommended Drill Size | 2.5 mm |
UNSPSC #: | 23241615 |
TAA Compliant: | Yes |
Weight: | 0.01 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov


