Hydraulic Quick Connect Coupler, Steel, ISO 16028, 3/4" x 1-11-1/2, Female NPTF, 3.25" Length, 3625PSI
(Pack of
1)
SKU:29973 Item#: 29973
Keep hydraulic connections clear in dirty conditions with this Quick Connect Coupler. The flat face design wipes clean easily and operates successfully in applications involving high pressure pulses. Heavy-duty locking sleeve provides greater strength and prevents accidental disconnection, while non-spill design guards against fluid loss during connection and disconnection. Ideal for use in agriculture, construction, mobile equipment, general industrial, mining and nuclear equipment. To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.
• Zinc-plated steel body
• PTFE and nitrile rubber seals
• Conforms to ISO 16028 Standards
• Operating temperature range: –4°F to +212°F
• 3/8" body size meets or exceeds HTMA requirements
Dixon: HT-Series
To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.
Couldn't load pickup availability
Catalog page#: 8-83
Frequently Bought Together
Z Series Crimp-On Hose End 1/4" x 1/2-20
Couldn't load pickup availability
Hydraulic Quick Connect Nipple Steel 3/8" x 1/2-14
Couldn't load pickup availability
Z Series Crimp-On Hose End 1" x 1-5/16-12
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 3/8-18
Couldn't load pickup availability
Z Series Crimp-On Hose End 1/4" x 1/2-20
Couldn't load pickup availability
Hydraulic Quick Connect Nipple Steel 3/8" x 1/2-14
Couldn't load pickup availability
Hydraulic Plug, 9/16-18"(06) Male JIC SAE 37 Degree Flare
Couldn't load pickup availability
MegaCrimp Crimp-On Coupling 1/2" x 3/4-16
Couldn't load pickup availability
Hydraulic Hose Protector 4 x 2-1/2" Yellow
Couldn't load pickup availability
DOT Elbow Male Nylon 1/4 x 1/8-27
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/4"
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Hydraulic Quick Connect Coupler 1/4" x 1/4-18
Couldn't load pickup availability
Hydraulic Quick Connect Nipple Steel 1" x 1-11-1/2
Couldn't load pickup availability
1/2" ISO-FF COUPL, 3/4"-16 ORB, STE
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Product Description
Keep hydraulic connections clear in dirty conditions with this Quick Connect Coupler. The flat face design wipes clean easily and operates successfully in applications involving high pressure pulses. Heavy-duty locking sleeve provides greater strength and prevents accidental disconnection, while non-spill design guards against fluid loss during connection and disconnection. Ideal for use in agriculture, construction, mobile equipment, general industrial, mining and nuclear equipment. To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.• Zinc-plated steel body
• PTFE and nitrile rubber seals
• Conforms to ISO 16028 Standards
• Operating temperature range: –4°F to +212°F
• 3/8" body size meets or exceeds HTMA requirements
Dixon: HT-Series
To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.
Technical Specifications
| Item#: | 29973 |
|---|---|
| Hydraulic / Pneumatic | Hydraulic |
| Description | Quick Coupling |
| Type | Coupler |
| Style | ISO 16028 |
| Standards | ISO 16028 |
| Body Size | 19mm (3/4") |
| Thread Size | 1-11-1/2 |
| Thread Style | Female NPTF |
| Burst Pressure | 14,500 PSI |
| Seal Material | Nitrile |
| Material | Steel |
| Locking Mechanism | 12 Balls |
| Flow | 50 gal/min |
| Length | 3.25 " |
| Temperature Range | -40 to 212 F |
| Working Pressure | 3,625 PSI |
| Hex Size | 1.77 " |
| Maximum Diameter | 1.89 " |
| Coupled Length | 6.04 " |
| UNSPSC #: | 27121701 |
| TAA Compliant: | Yes |
| Weight: | 1.8 lb |
