Maintenance Coating S60 Water Based Gloss Safety Red 1 Gallon
(Pack of
1)
SKU:1710415 Item#: 1710415
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.
High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
Impervious to moisture; easily cleaned and sanitized
Dries fast-30 minutes to touch, return to service in 24 hours
Easy-to-use, two-component system-order tint base and activator separately
Satin finishes represent sierra s62 system
Achieve maximum performance by starting with an s70 or s71 primer
Practical Coverage at Recommended DFT (assumes 15% material loss): 230-340 sq. ft./gal. (5.7-8.4 m²/l), 135-195 sq. ft./gal. (3.3-4.8 m²/l), 225-340 sq. ft./gal. (5.5-8.4 m²/l)
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Tack Free: 15-45 Minutes
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Dries Hard: 1.5-2 Hours
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Recoat: 1-3 Hours, clear finishes must be dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Foot Traffic - Light Foot Traffic: 3 hours, Normal Foot Traffic: 24 Hours
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10-14 Days
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Foamy Orange Citrus Solvent Degreaser 18oz
Couldn't load pickup availability
Heavy Duty Red Grease 10.75oz
Couldn't load pickup availability
Clean Lube II PTFE Dry Lubricant 12.75oz
Couldn't load pickup availability
High Solids Paints Omaha Orange
Couldn't load pickup availability
High Solids Paints Equipment Yellow
Couldn't load pickup availability
High Solids Paints Red Oxide
Couldn't load pickup availability
Acrylic Enamel Gloss Navy Gray 1 Gallon
Couldn't load pickup availability
High Solids PolyUrea Floor Coating Primer Arctic Tan 15 Gallon
Couldn't load pickup availability
Concrete Floor Paint Urethane Green 1 Gallon
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Product Description
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish. High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
Impervious to moisture; easily cleaned and sanitized
Dries fast-30 minutes to touch, return to service in 24 hours
Easy-to-use, two-component system-order tint base and activator separately
Satin finishes represent sierra s62 system
Achieve maximum performance by starting with an s70 or s71 primer
Practical Coverage at Recommended DFT (assumes 15% material loss): 230-340 sq. ft./gal. (5.7-8.4 m²/l), 135-195 sq. ft./gal. (3.3-4.8 m²/l), 225-340 sq. ft./gal. (5.5-8.4 m²/l)
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Tack Free: 15-45 Minutes
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Dries Hard: 1.5-2 Hours
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Recoat: 1-3 Hours, clear finishes must be dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Foot Traffic - Light Foot Traffic: 3 hours, Normal Foot Traffic: 24 Hours
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10-14 Days
Technical Specifications
| Item#: | 1710415 |
|---|---|
| Manufacturer Model #: | 248287 |
| Type | Water-Based Epoxy Maintenance Coating |
| Container Type | Can |
| Size | 1 gal |
| Color | OSHA Safety Red |
| Coverage | 225-340 ft² |
| Physical Form | Liquid |
| Work Time | 11 h |
| Cure Time | 10-14 h |
| UNSPSC #: | 31201710 |
| TAA Compliant: | Yes |
Product Resources
View additional documents HERE . Additional languages available.
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
