Mega Wear-Flex Kit Non-Sag
(Pack of
1)
The complete application kit for rubber repair, or any material that undergoes vibration or expansion/contraction movements.
Contains a non-sagging formula
Forms a flexible bond that withstands chemicals, grease, oil, and water
Remains flexible at low temperatures
Automatic one-step mixing and dispensing provide an easy-to-use system with very little waste
Contains: Wear-Flex Rubber Adhesive, dispenser gun, adhesive primer, buffing solution, wire wheel, surface conditioning disc, and utility knife.
Tensile Strength: 1300 PSI
Temperature Range: -40°F to 250°F (-40°C to 121°C)
Working time: 1 - 2 minutes
Functional cure: 4 hours
When used on rubber, Wear-Flex Rubber Primer (EG57574000) is required for proper adhesion. Not recommended for highway tire repair.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Frequently Bought Together

Gold Thread Sealant Tape Yellow 1/2 x 540"
Couldn't load pickup availability

Flexseal Dispense-A-Gasket RTV Silicone Blue 8oz
Couldn't load pickup availability

Mega-Stick
Couldn't load pickup availability

High Solids Paint JLG Orange
Couldn't load pickup availability

High Solids Paints OSHA Yellow
Couldn't load pickup availability

Clean Lube II PTFE Dry Lubricant 12.75oz
Couldn't load pickup availability

Parker Lord Rubber Primer
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability

Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
Product Description
The complete application kit for rubber repair, or any material that undergoes vibration or expansion/contraction movements.Contains a non-sagging formula
Forms a flexible bond that withstands chemicals, grease, oil, and water
Remains flexible at low temperatures
Automatic one-step mixing and dispensing provide an easy-to-use system with very little waste
Contains: Wear-Flex Rubber Adhesive, dispenser gun, adhesive primer, buffing solution, wire wheel, surface conditioning disc, and utility knife.
Tensile Strength: 1300 PSI
Temperature Range: -40°F to 250°F (-40°C to 121°C)
Working time: 1 - 2 minutes
Functional cure: 4 hours
When used on rubber, Wear-Flex Rubber Primer (EG57574000) is required for proper adhesion. Not recommended for highway tire repair.
Technical Specifications
Item#: | 1638634 |
---|---|
Type | Non-Sagging Adhesive |
Container Type | Kit |
Work Time | 1 to 2 min |
Functional Cure | 4 h |
UNSPSC #: | 31201607 |
TAA Compliant: | No |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
This item cannot be sold in the following regions: CA, MT
