Mounted Flap Wheel 1"
(Pack of
6.0)
Epoxy center construction holds stem and each flap securely in place
1/4" radius shank end design permits ease of installation into collet of tool
Non-marring end cap prevents work surface from being damaged
Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Premium Grinding Wheel 7"
Couldn't load pickup availability

Premium Grinding Wheel 4-1/2"
Couldn't load pickup availability

Mounted Flap Wheel 1"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 9/64"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 7/64"
Couldn't load pickup availability

2" Dia. x 1" Wide Flap Wheel 60 Grit, 1/4" Shank Dia.
Couldn't load pickup availability

3/4" Dia. X 3/8" Wide, Flap Wheel 80 Grit 1/8" Shank
Couldn't load pickup availability

Flap Band 1-3/4"
Couldn't load pickup availability

Nylon Cable Tie 4" Black
Couldn't load pickup availability

High Solids Paints Gloss Black
Couldn't load pickup availability

Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability

Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 31/64"
Couldn't load pickup availability

Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Product Description
Epoxy center construction holds stem and each flap securely in place 1/4" radius shank end design permits ease of installation into collet of tool
Non-marring end cap prevents work surface from being damaged
Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
Item#: | 92016M06 |
---|---|
Type | Flap Wheels |
Diameter | 1 " |
Width | 1 " |
Arbor Size | 1/4 " |
Grit | 60 |
Maximum RPM | 30,000 RPM |
Grain | Aluminum Oxide |
Aluminum Approved | Yes |
UNSPSC #: | 31191509 |
TAA Compliant: | No |
Weight: | 0.36 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
