Mounted Flap Wheel 2"
(Pack of
1.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog Page#: 12-29
Frequently Bought Together
Mounted Flap Wheel 2"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Abrasive Mounted Point 1/2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability
1/2" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
3/8" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Flap Band 3-1/2"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
2" Dia. X 1" Wide, Flap Wheel, 80 Grit, 1/4" Shank
Couldn't load pickup availability
Rechargeable Neck Light
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
Jobber Length Drill Bit HSS 9/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 83834 |
|---|---|
| Type | Flap Wheels |
| Diameter | 2 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 80 |
| Maximum RPM | 25,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | No |
| Weight: | 0.14 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
