Nylon Miniature End Brush 3/4"
(Pack of
2.0)
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Use bristle or nylon fill brushes for cleaning and polishing I.D. and O.D. surfaces, wet scrubbing, cleaning and fine abrasive finishing
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 12-72
Frequently Bought Together
Steel Crimped End Brush 1/2"
Couldn't load pickup availability
Standard Twist Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Stringer Bead Twist Knot-Type Wire Wheel 6"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Phenolic Backing Plate Flap Disc 4-1/2"
Couldn't load pickup availability
Steel Crimped End Brush 1/2"
Couldn't load pickup availability
Steel Knot-Type End Brush 1"
Couldn't load pickup availability
Steel Knot-Type End Brush 1"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
Lock Washer Alloy Steel 3/8"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability
Mechanic's Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Use bristle or nylon fill brushes for cleaning and polishing I.D. and O.D. surfaces, wet scrubbing, cleaning and fine abrasive finishing
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 89217 |
|---|---|
| Type | Miniature |
| Material | Nylon |
| O.D. | 3/4 " |
| Maximum RPM | 37,000 |
| Shank Size | 1/8 " |
| Shank Length | 7/8 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
