Pilotdrive Cryotap 1/2"-13 Starter Hand Tap
(Pack of
1)
SKU:DY80635017 Item#: DY80635017
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: LE-74
Frequently Bought Together
Mounted Flap Wheel 1"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Jobber Length Drill Bit Kit 29 Pcs
Couldn't load pickup availability
3/16" - 1/2" Cryonitride Spiral Fluted Step Drill - 5/16" Shank
Couldn't load pickup availability
Hex Cap Screw Grade 9 Alloy Steel 1/2-13 x 3-1/4"
Couldn't load pickup availability
Food Grade Silicone Lubricant 10oz
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
HSS Spiral Point Hand Tap M3 x 0.5
Couldn't load pickup availability
Pilotdrive Cryotap #8-32 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 1-8
Couldn't load pickup availability
1/4-20" Bottoming Tap , 4-Flute, HSS
Couldn't load pickup availability
Cryotap 3/8"-16 Taper Hand Tap
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap 10-24
Couldn't load pickup availability
Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Cordless Right Angle Grinder Charging Bundle
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635017 |
|---|---|
| Type | Fractional |
| Diameter | 1/2 " |
| Pitch | 13 |
| Flutes | 4 |
| Thread Length | 15/16 " |
| H Limits | H3 |
| Overall Length | 3-3/8 " |
| Recommended Drill Size | 27/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.09 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
