Pilotdrive Cryotap 5/8"-11 Starter Hand Tap
(Pack of
1)
SKU:DY80635021 Item#: DY80635021
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: LE-74
Frequently Bought Together
Mounted Flap Wheel 2" 60 Grit
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/64"
Couldn't load pickup availability
Premium Ceramic Grinding Disc 4-1/2"
Couldn't load pickup availability
Lock And Load Interchangeable Small Punch and Chisel Set, 13pc
Couldn't load pickup availability
Hex Cap Screw Grade 9 Alloy Steel 9/16-12 x 3"
Couldn't load pickup availability
Blue Grease HT Grease 1 Lb.
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Cable Tie 13.38" Black
Couldn't load pickup availability
Master Series Penlight Flashlight
Couldn't load pickup availability
Pilotdrive Cryotap 7/8"-14 Starter Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap M7 x 1.0 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 1/4-20
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap 10-32
Couldn't load pickup availability
HSS Combination Drill-Tap 8-32
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 10-24
Couldn't load pickup availability
57Pc Torsion Impact Bit Master Set
Couldn't load pickup availability
1/4" Cordless Impact Hex Driver Charging Bundle
Couldn't load pickup availability
Index-Tend Demo Wrecking Bar
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635021 |
|---|---|
| Type | Fractional |
| Diameter | 5/8 " |
| Pitch | 11 |
| Flutes | 4 |
| Thread Length | 1-3/32 " |
| H Limits | H3 |
| Overall Length | 3-13/16 " |
| Recommended Drill Size | 17/32 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.175 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
