Pilotdrive Cryotap M14 x 2.0 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 1/8"

Item#: 84725M06
DV_ZoomOriginal_P_22765.jpg

Cut-Off Wheel for Right Angle Grinder 4-1/2"

Item#: 60773M12
DV_ZoomOriginal_I_17419.jpg

Twist-On Surface Conditioning Disc 2" Maroon

Item#: 17415
DV_ZoomOriginal_P_514.jpg

Hex Cap Screw Property Class 12.9 M20-2.5 x 90mm

Item#: 84503A
DV_ZoomOriginal_I_KT11459.jpg

Hex Head Bolt with 7/8" Washer Steel 5/16-18

Item#: KT11460
DV_ZoomOriginal_I_5574_WB.jpg

Cable Tie 30" White

Item#: 90204
DV_ZoomOriginal_I_1495188.jpg

Stepdown Butt Connector 22 to 18/16 to 14 AWG

Item#: 1495188
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 1/4-20

Item#: 53979
DV_ZoomOriginal_I_88437.jpg

SAE Flat Washer Thru-Hardened Steel 3/8"

Item#: 88437
DV_ZoomOriginal_I_61134.jpg

HSS Spiral Point Hand Tap 3/8-16

Item#: 61134
DV_ZoomOriginal_I_61139.jpg

HSS Spiral Point Hand Tap 9/16-18

Item#: 61139
DV_ZoomOriginal_I_61117.jpg

HSS Spiral Point Hand Tap 8-36

Item#: 61117
DV_ZoomOriginal_P_CTPMP3042.jpg

Cryo-Drap 1/2"-13 Drill & Tap Combo, 135o Split Point, W/Flats

Item#: DY80244424
DV_ZoomOriginal_P_8134.jpg

HSS Combination Drill-Tap 6-32

Item#: 59919
DV_ZoomOriginal_P_546.jpg

4-Flute HSS Bottoming Hand Tap M10 x 1.5

Item#: 63431
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 11/64"

Item#: 84728
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 7/64"

Item#: 84724
DV_ZoomOriginal_I_DY81100332.jpg

Screwdriver Anti Slip Phillips No 2 X 4In

Item#: DY81100332

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: DY80636024
Type Metric
Diameter M14
Pitch 2.0 mm
Flutes 4
Overall Length 3-19/32 "
Recommended Drill Size 12 mm
UNSPSC #: 23241615
TAA Compliant: No
Weight: 0.135 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Your Recently Viewed Items