Power-Grip Heat Shrink Hose Clamp 1-5/16"-1-1/2"
(Pack of
3)
Stops leaks, even on out-of-round applications. Power-Grip™ hose clamps will conform to any shape of hose and housing.
• Unsurpassed sealing on all types of coolant hose, even silicone
• Easily installed with a standard heat gun
• Clamps expand and contract with the thermal cycling of a vehicle’s coolant system, eliminating cold engine coolant leaks
• Never needs retightening
• Tough thermoplastic material
• Large clamp width covers more surface area, including the bead
• Wide sealing capacity – won’t damage hose
• Maintenance-free – install and forget
• No sharp edges
• Unaffected by oil or other automotive fluids
• Installation instructions included
If a hose falls between sizes, use the smaller clamp.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 5/8 to 1-1/4"
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
DOT Union Brass 3/8 x 3/8"
Couldn't load pickup availability
DOT Union Nylon 3/8 x 3/8"
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 5/8 to 1-1/4"
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Hex Head Plug Brass 3/8-18 Male NPT
Couldn't load pickup availability
Waterproof Work Aqua Light 66 LED
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Product Description
Stops leaks, even on out-of-round applications. Power-Grip™ hose clamps will conform to any shape of hose and housing.• Unsurpassed sealing on all types of coolant hose, even silicone
• Easily installed with a standard heat gun
• Clamps expand and contract with the thermal cycling of a vehicle’s coolant system, eliminating cold engine coolant leaks
• Never needs retightening
• Tough thermoplastic material
• Large clamp width covers more surface area, including the bead
• Wide sealing capacity – won’t damage hose
• Maintenance-free – install and forget
• No sharp edges
• Unaffected by oil or other automotive fluids
• Installation instructions included
If a hose falls between sizes, use the smaller clamp.
Technical Specifications
| Item#: | 56233 |
|---|---|
| Category | Gates Power-Grip Heat Shrink Hose Clamps |
| Material | Thermoplastic |
| Fits Hose I.D. | 1 " |
| Size | 1-1/2 " |
| I.D. | 1 " |
| Minimum Diameter | 1-3/16 " |
| Maximum Diameter | 1-1/2 " |
| Shrink Range | 1-3/16 - 1-1/2 |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
