S62 Water Based Epoxy Coating Satin Deep Base 1 Gallon
(Pack of
2)
SKU:1710427 Item#: 1710427
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.
• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system order tint base and activator separately
• Satin finishes represent sierra s62 system
• Practical Coverage at Recommended DFT: 230 - 340 sq. ft./gal. (5.7 - 8.4 m²/l)
• Practical Coverage at Recommended DFT for Color Finishes: 135 - 195 sq. ft./gal. (3.3 - 4.8 m²/l)
• Practical Coverage at Recommended DFT for Clear Finishes: 225 - 340 sq. ft./gal. (5.5 - 8.4 m²/l)
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Tack Free: 15 - 45 minutes
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Dries Hard: 1.5 - 2 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Recoat: 1 - 3 hours, clear finishes must dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Foot Traffic: Light Foot Traffic: 3 hours; Normal Foot Traffic: 3 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10 - 14 days
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
High Solids Paints Flat Black
Couldn't load pickup availability
Persist High Temperature Bentonite Grease 14oz
Couldn't load pickup availability
Prizm PTFE Penetrating Gel Lubricant 13oz
Couldn't load pickup availability
High Solids Paints Light Gray
Couldn't load pickup availability
High Solids Paints OSHA Yellow
Couldn't load pickup availability
High Solids Paint Genie Lift Blue
Couldn't load pickup availability
6700 Concrete Decorative Epoxy Tan 3 Gallon Kit
Couldn't load pickup availability
Epoxy Activator 100% VOC 6500 Pen Base 1 Gallon
Couldn't load pickup availability
GP Epoxy 8000S Concrete Dunes 15 Gallon
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Product Description
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system order tint base and activator separately
• Satin finishes represent sierra s62 system
• Practical Coverage at Recommended DFT: 230 - 340 sq. ft./gal. (5.7 - 8.4 m²/l)
• Practical Coverage at Recommended DFT for Color Finishes: 135 - 195 sq. ft./gal. (3.3 - 4.8 m²/l)
• Practical Coverage at Recommended DFT for Clear Finishes: 225 - 340 sq. ft./gal. (5.5 - 8.4 m²/l)
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Tack Free: 15 - 45 minutes
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Dries Hard: 1.5 - 2 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Recoat: 1 - 3 hours, clear finishes must dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Foot Traffic: Light Foot Traffic: 3 hours; Normal Foot Traffic: 3 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10 - 14 days
Technical Specifications
| Item#: | 1710427 |
|---|---|
| Manufacturer Model #: | 282601 |
| Type | Water-Based Epoxy Maintenance Coating |
| Container Type | Can |
| Size | 1 gal |
| Color | Deep Tint Base |
| Coverage | 225-340 ft² |
| Physical Form | Liquid |
| Work Time | 15 h |
| Cure Time | 10-14 h |
| UNSPSC #: | 31201710 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
