Silicone Heater and Radiator Hose 1-11/16" OD
(Pack of
3.0)
• Use where space requirements dictate sharp bends
• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 22-9
Frequently Bought Together
Silicone Heater and Radiator Hose 3" OD
Couldn't load pickup availability
Fuel Line Hose 5/16" ID x 25'
Couldn't load pickup availability
Silicone Heater and Radiator Hose 1-1/4" OD
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
Couldn't load pickup availability
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
DOT Elbow Male Nylon 3/8 x 1/4-18
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/16 to 1 In"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #12 7/8 to 1-1/4"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 7/16 to 25/32"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 13/16 to 1-1/2"
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Product Description
• Use where space requirements dictate sharp bends• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Technical Specifications
| Item#: | 88705 |
|---|---|
| Type | Silicone Heater and Radiator Hose |
| I.D. | 1-1/4 " |
| Bend Radius | 2-1/2 " |
| Burst Pressure | 150 PSI |
| Hose Cover Material | Silicone |
| Hose Reinforcement | Polyester with Steel Helix |
| Temperature | -65 to +350 F |
| Category/Performance | Better Quality - 2 Ply Large Diameter - Steel Reinforced |
| UNSPSC #: | 25170000 |
| TAA Compliant: | Yes |
| Weight: | 1.5 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
