Silicone Heater and Radiator Hose, Better Quality, 2-Ply, 1" ID, 1-23/64" OD, 1-1/2" Bend Radius, 60PSI
(Pack of
3)
• Use where space requirements dictate sharp bends
• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 22-9
Frequently Bought Together
Silicone Heater and Radiator Hose 2-15/16" OD
Couldn't load pickup availability
Windshield Wiper Hose 3/32" ID x 50'
Couldn't load pickup availability
Hose to Pipe Nipple Straight 5/8" x 1/2-14
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
DOT Elbow Male Nylon 1/4 x 1/4-18
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #8 5/8 to 15/16"
Couldn't load pickup availability
Hose Clamp 301 SS 2-1/16 to 3"
Couldn't load pickup availability
Hose Clamp 301 SS 1/2 to 29-32"
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
Couldn't load pickup availability
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
Product Description
• Use where space requirements dictate sharp bends• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Technical Specifications
| Item#: | 90779 |
|---|---|
| Type | Silicone Heater and Radiator Hose |
| I.D. | 1 " |
| Hose O.D. | 1-23/64 " |
| Bend Radius | 1-1/2 " |
| Working Pressure | 60 |
| Burst Pressure | 160 PSI |
| Hose Cover Material | Silicone |
| Hose Reinforcement | Polyester with Steel Helix |
| Temperature | -65 to +350 F |
| Category/Performance | Better Quality - 2 Ply Large Diameter - Steel Reinforced |
| Dash Size | -16 |
| UNSPSC #: | 25170000 |
| TAA Compliant: | Yes |
| Weight: | 1.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
